A Step-by-Step Guide to Replacing a Watch Battery at Home
Watches are
not only used for measuring time; they can also be used for fashion statements,
sentimental keepsakes, or daily essentials. However even the best of watches
can freeze when its battery is dead. Fortunately, watch
battery replacement at home is a straightforward task that can help you
avoid a lot of hassle and expense. Read this step-by-step guide to help you fix
your watch and have it working again.
Tools You’ll
Need
Before you
start, gather the necessary tools to make the process smooth and efficient:
- Watch
case opener (or a
small flathead screwdriver)
- Tweezers (preferably plastic or non-metallic)
- New watch battery (ensure it's the correct size and type)
- Soft cloth or towel (to protect the watch and catch small
parts)
- Small
container (to
hold screws and other tiny components)
Step 1:
Prepare Your Workspace
Choose a
workspace that is clean and has good lighting. Put a smooth cloth or a towel on
the top of the surface in order not to scratch your watch and collect any
falling parts. Ensure that you have all tools needed ready and easily
accessible.
Step 2: Open
the Watch Case
Most watches
have either a snap-back or screw-back case.
For
Snap-Back Cases:
- Pinpoint the small indentation or groove
on the edge of the back cover.
- Insert the edge of the watch case opener
or flathead screwdriver into the groove.
- Gently twist or pry to pop the back
cover off. Be cautious to avoid scratching the case or damaging the watch.
For
Screw-Back Cases:
- Identify the notches or grooves around
the edge of the back cover.
- Use a watch case opener designed for
screw-back cases, aligning it with the notches.
- Turn the tool counterclockwise to
unscrew the back cover.
Step 3:
Identify and Remove the Battery
When the
back cover is removed you should be able to observe the battery secured by a
clip or bracket.
1.
Note the battery type and position: If you have not yet bought a replacement,
make a note of the battery size and its type.
2.
Remove the battery: Using the tweezers, gently pinch the battery
and pull it out from the compartment. Use a gentle pressure so as not to
destroy other elements that may be in the vicinity.
Step 4:
Insert the New Battery
- Check
the polarity: Most
batteries will have a positive terminal usually indicated by the ‘+’ sign
and a negative terminal indicated by the ‘-‘sign. Ensure that you replace
it and fix the new battery in the same position as the previous one.
- Insert
the battery: Take
the new battery with the tweezers, and fit it in the compartment in the
right position.
Step 5: Test
the Watch
Before
closing the case, ensure that the watch is in working order as it should be
ticking. If it isn’t, make sure the battery is well connected and try again. If
it is still not working even after all these, then it could be a bigger problem
and you might need a professional to help.
Step 6:
Final Checks
Once the
case is tightly sealed, you should ensure that the watch is working properly to
meet expectations. Adjust the current time and date as necessary and continue
to wear your watch normally.
Tips for
Success
●
Handle with care: Components of a watch are fragile, and
therefore should be handled lightly and carefully.
●
Regular maintenance: It is suggested that one should clean the
face and Replace the battery power of the watch after using it for a period of
2 years.
Conclusion
Changing a
watch battery is as easy as using a screwdriver and can be done at home and
avoid frequent visits to jewelers. With proper accessories and sometime
investment, you do not have to allow your favorite watch to begin to lose its
time.
Now, it is
time to take the challenge and work with hands wearing gloves and fixing your
watch! If this still does not clear things up for you, come to Littleton Fine Jewelry, we
provide top-notch watch
battery replacement services. Our expert technicians guarantee
accuracy, speed and efficiency in handling all your watch needs.
Comments
Post a Comment